Construction

Home Industries & Applications Construction

Construction

The construction industry places extremely high demands on adhesives: temperatures below freezing point in winter, high temperatures in summer, sun or rain, dusty environments – all of this calls for high-quality adhesives that must bond reliably and for a long time, whatever the situation, and on a variety of materials.

artimelt hot melt adhesives meet these requirements and are also stable in terms of aging, and environmentally friendly. They will bond at high temperatures as well as below freezing point. Once bonded, hot melt adhesives from artimelt can withstand even the most severe weather conditions.

Characteristics

All artimelt hot melt adhesives for the construction industry share a number of characteristics that are particularly important for this sector:

High initial adhesion even on rough, uneven and not perfectly clean surfaces
High temperature resistance, across a wide range of temperatures
High application weights possible
Temperature-sensitive materials can also be coated
Reliable bonding of different materials
High aging stability
Available as colored adhesives

Classic applications

Insulating and sealing tapes
Bonding of overlaps for underfloor heating substructures
Bonding of insulation materials or insulation boards
Facade applications
Self-adhesive coverings
Edge strips
Impact sound insulation
Roofing
Carpets
Windows and doors
HVAC components
Lamination of membranes/layers or roofing underlays
Anti-slip coatings for coverings

The adhesives developed by artimelt for the construction sector are not suitable for structural bonding.

Specific product characteristics

artimeltbasic

Room temperature

Hot melt adhesives with artimeltbasic properties are the starting point for your room temperature applications. They are also available in color, depending on the requirements.

Industries

artimeltuvcured

UV crosslinkable

UV hot melt adhesives with artimeltuvcured properties are irradiated (“crosslinked”) with UVC light to give them the required adhesion and shear resistance properties. Since UVC light is not part of the natural light spectrum, no post-crosslinking can occur during application. Different adhesion properties can be achieved by varying the UV irradiation intensity when crosslinking the adhesive. High internal strength (cohesion) is achieved by strong crosslinking of the adhesive, while high adhesion values (adhesion) are achieved with less UV radiation.

In industrial applications, UV-crosslinked hot melt adhesives are suitable for permanent or removable, resealable and repositionable labels, as well as for adhesive tapes. Due to their high UV stability, they can be used for outdoor applications without any problems.

Industries

artimeltecoline

Bio hot melt adhesives

Hot melt adhesives with artimeltecoline properties combine the two specific properties of artimeltbiobased and artimeltrecyclable. Significantly, all hot melt solutions developed with these properties consist primarily of renewable raw materials and are recyclable. Compostable adhesives represent the next challenge.

Industries

Download

artimeltbiobased

Sustainable bonding

Hot melt adhesives with artimeltbiobased properties (both pressure-sensitive adhesives and non-PSA) are characterized by high sustainability. At least 50% of the raw materials used are renewable and bio-based. Depending on the application, the proportion of renewable raw materials can even be higher than 90%.

These adhesive solutions are developed to your specific requirements and are particularly suitable for paper and film labels for bags, pouches and packaging materials made from renewable materials as well as for self-adhesive finishes for plastic products made from renewable sources.

Industries

Download

artimeltpermanent

Almost indestructible

For some applications, it is crucial that an adhesive is (almost) impossible to remove. Hot melt adhesives with artimeltpermanent properties meet this requirement. These adhesives exhibit exceptionally good adhesion to a wide range of different surfaces.

Industries

artimeltlasermarkable

Clear labeling

If the authenticity or integrity of an end product is extremely important, then artimeltlasermarkable hot melts, which can be labeled or marked using laser technology, are the ideal choice. They enable the quick and easy labeling of serial production or one-off items on the fly. It is also possible to combine various security elements. artimeltlasermarkable is based on classic hot melt formulations to which an additive is added. The labeling can be lasered directly onto the adhesive or through a transparent substrate. The innovative hot melt adhesive meets EU and FDA guidelines in accordance with food regulations.

Industries

Technical Details

artimeltsurface

For demanding surfaces

Hot melt adhesives with artimeltsurface properties are suitable for difficult surfaces. Depending on your application, this may involve smooth or painted surfaces, metal, LSE or plasticized films, or even coatings and varnishes containing silicone. Certain substrates have low surface tension which negatively affects the adhesion of ordinary adhesives. Your adhesive with artimeltsurface properties is characterized by very strong and even increasing adhesion over time. These labels or adhesive tapes cannot be removed from the surface without damaging it: either the label is destroyed, or the adhered surface is affected.

Suitable for:

Pharmaceutical packaging
Tamper-proof labels
Round adhesives
RFID security labels
Sealing tapes for envelopes and security bags
Tapes for construction applications

Industries

artimeltcolored

Coloring

As the name suggests, the distinguishing feature of hot melt adhesives developed for your application with artimeltcolored properties is color. For example, simply through its visibility, coloring makes it easy to see where the adhesive has been coated. Uncoated or insufficiently coated parts or areas can therefore be screened out. Or the color of the adhesive clearly shows it is the right one, e.g. when different adhesives are used. Almost all color variants are possible, including corporate and logo colors.

Industries